Main Gate Wedding Gate Design: Floral, Fabric and LED Entrance Ideas
- Designs
- 12
- Group
- Home, village and more
- Checked
- Oct 2026
A main gate wedding gate design sets the mood before guests even step in. This page shows 12 original wedding entrance gates for homes, marriage halls and marriage gardens, from flower arches and fabric drapes to marigold and LED gates.
Every idea here is decor only. Each photo has a size, frame type and a note for the decorator or welder who builds the frame. We keep all gates free of names and lettering in the photos; if you want a welcome board, place it on a separate stand.
For the house gate itself, browse main gate design for home. Farm house weddings with a wide drive can borrow from village and farm house gates.
Floral Main Gate Wedding Gate Design
A floral main gate wedding gate design is built on a light iron or bamboo frame and covered in fresh or artificial flowers. Fresh flowers look best for one or two days; artificial ones can be reused.

| Size | 12 x 10 ft, arch |
|---|---|
| Material | MS pipe frame + foam |
| Finish | Pink and white flowers |
A round-top arch packed with pink roses and white carnations makes a soft, classic entry. It suits a lawn or banquet venue with a wide path.
Fabricator tip: Ask the decorator to anchor the frame with sandbags or base plates; tall arches tip over in wind.

| Size | 10 x 9 ft, square |
|---|---|
| Material | MS square tube frame |
| Finish | White, blue florals |
A square frame looks modern and gives more surface for flowers than a round arch. White and blue keep it cool for a day wedding.
Fabricator tip: Use a frame of 25x25 tube, painted white, so it does not show through gaps in the flowers.
Fabric Drape Wedding Main Gate Design
Fabric is the lowest cost way to cover a big entry. Drapes in two colours, tied back with flowers, turn a plain marriage hall main gate design into a warm welcome.

| Size | 14 x 12 ft, drape |
|---|---|
| Material | MS truss + fabric |
| Finish | Red, gold fabric |
Red and gold drapes with marigold tie-backs are the classic marriage hall look. The fabric hides the hall's iron gate fully.
Fabricator tip: Fix the truss to the hall gate pillars with clamps, never by welding on the existing gate.

| Size | 16 x 12 ft, drape |
|---|---|
| Material | MS truss + chiffon |
| Finish | Peach, white, gold |
Light chiffon in peach and white moves in the breeze and looks soft in photos. Best for an evening function in a marriage garden.
Fabricator tip: Weigh the drape ends with small sand bags hidden in flowers so wind does not lift them.
Marigold and LED Main Gate Event Entry Gate Design
Marigold is the most loved wedding flower in India: cheap, bright and long lasting. Adding LED strings makes the main gate event entry gate design work for night photos too.

| Size | 10 x 8 ft, curtain |
|---|---|
| Material | Rope on MS rod |
| Finish | Yellow, orange |
Hundreds of yellow and orange marigold strings hung like a curtain make a festive wall of colour. It can be tied to any existing house gate frame.
Fabricator tip: Hang strings from a separate rod clamped to the pillars so the house gate still opens.

| Size | 9 x 9 ft, arch |
|---|---|
| Material | Bamboo frame + pith |
| Finish | White and red |
Banana stems on both sides with white and red decor is the traditional Bengali wedding entry. The white comes from light pith work and white flowers.
Fabricator tip: Fix banana stems in clay pots or drums so they stand straight for the full two days.

| Size | 12 x 10 ft, tunnel |
|---|---|
| Material | MS pipe tunnel frame |
| Finish | Marigold, warm LED |
Warm LED curtain lights behind marigold garlands give a golden glow at night. It also lights the path, so no extra flood lights are needed.
Fabricator tip: Use waterproof outdoor LED sets and run power from a separate MCB with earthing.
Simple Main Gate Wedding Gate Design for Home
A simple main gate wedding gate design for a house needs only flowers, leaves and a few lights on the existing gate. These ideas can be done by the home decorator in a few hours.

| Size | 10 x 6 ft, house gate |
|---|---|
| Material | Existing MS gate |
| Finish | Rose, jasmine garlands |
Garlands of roses and jasmine looped over the top of the house gate look neat and cost little. Keep the latch free so the gate can open.
Fabricator tip: Tie garlands with soft cotton thread, not wire, so the gate paint does not get scratched.

| Size | 9 x 6 ft, house gate |
|---|---|
| Material | Pillar cone frames |
| Finish | Yellow, white flowers |
Tall flower towers on each pillar frame the gate without covering it. A good choice when the gate must open and close many times a day.
Fabricator tip: Ask for cone frames that sit on the pillar caps and are tied, not drilled, into the pillar.

| Size | 8 x 8 ft, arch |
|---|---|
| Material | Bamboo arch frame |
| Finish | Green leaves, warm LED |
An arch of mango and ashoka leaves with fairy lights is simple, natural and cheap. It looks fresh in the day and glows at night.
Fabricator tip: Keep the arch 1 ft in front of the gate so it does not block the swing of the leaves.
Planning a Wedding Entrance Gate: Size and Frame
| Place | Gate width | Height | Frame |
|---|---|---|---|
| Home gate | Same as house gate | 7 to 9 ft | Bamboo or light pipe |
| Marriage hall | 12 to 16 ft | 10 to 14 ft | MS truss |
| Marriage garden | 14 to 20 ft | 12 to 16 ft | MS truss with base plates |
| Path tunnel | 8 to 12 ft | 9 to 10 ft | MS pipe arches |
Keep at least 8 ft clear width where a car or a horse cart has to pass. Check overhead wires before putting up a tall frame. Cost depends on the area of flowers or fabric, frame hire, lights, labour and transport, so ask the decorator to quote each part.
Safety and Care Tips for Wedding Gates
- Anchor every frame with base plates, pegs or sand bags. Wind is the main risk.
- Use outdoor rated lights, joints taped and lifted off wet ground.
- Do not weld or drill into the house gate. Clamp or tie instead.
- Spray fresh flowers in the morning and evening so they last two days.
- Remove the decor within a day after the event so wet flowers do not stain the gate paint.
For societies and halls that host many events, a fixed arch on strong pillars saves setup time. See society, school and factory gates for sturdy entry ideas.
Main gate questions
What is a simple main gate wedding gate design for a house?
Loop flower garlands over the top rail of your house gate and add a flower tower on each pillar. Mango leaf strings and a few fairy lights finish it. It can be done in two or three hours.
Which flowers last longest on a floral main gate wedding gate design?
Marigold, chrysanthemum and carnation last two to three days outdoors. Roses and orchids droop faster in heat. Mix artificial flowers at the back and fresh ones in front to save cost.
How big should a marriage hall main gate design be?
Most halls need 12 to 16 ft width and 10 to 14 ft height so it looks right against the building. Keep the opening at least 8 ft wide for guests and photographers.
What is a Bengali main gate wedding gate design?
It usually has a fresh banana stem on each side of the entry, white decor from tuberose and pith work, and bright red flowers. The look is simple, white and red, and very traditional.
What makes a main entrance creative event gate design stand out?
Use one strong idea: a leaf tunnel, a marigold curtain or a lit fabric frame. Keep colours to two or three and let the lights do the rest at night. Too many elements look messy in photos.
Can I use a marriage garden main gate design at home?
Yes, if you scale it down. A home entry rarely needs more than 9 ft height. Use a lighter bamboo frame and keep it in front of the house gate so the gate can still open.






